Receiver 1 with one antenna connection, range of approx. 40 m, for use in the stable
Receiver 2 with two antenna connections (normal antenna connection and additional antenna connection for monitoring the paddock area), range of approx. 250 m
Use the receiver with the small black antenna only if the receiver is placed right next to the foaling box.
- Power: Green light appears when the receiver is switched on.
- On/Off: With this switch, the receiver is switched on and off.
- Alarm: Red light appears when the receiver is activated.
- Reset: Reverts acoustic alarm and puts receiver back to “ready” mode.
- L-Rec: Green light appears if the left antenna receives the transmitter’s signal.
- R-Rec: Green light appears if the right antenna receives the transmitter’s signal (only for receiver 2)
- Pager: Yellow light appears when the receiver is activated and the Euro Funk system (if used) is transmitting.
- Low Batt.: Red light flashes if the receiver’s batteries need to be reloaded and the warning system for low batteries is beeping. The receiver will normally work even with weak batteries, provided it is plugged into an energy source. To reload the battery, you should leave the receiver switched on once connected to an energy source. The beeping concerning the receiver’s low battery will stop after 30 minutes.
- Antenne: There two antenna connections for receiver 2 only. Receiver 1 has only one antenna (10) and one connection.
- Antenne: There two antenna connections for receiver 2 only. Receiver 1 has only one antenna (10) and one connection.
- PG1: Connection for the Euro Funk system (2001 model), if this accessory is used.
- Aux. Power Dialer: Connection for the cable of the phone dialler, if this accessory is used.
- PG2: Connection for the red/black jack plug for the Euro Funk system (old model), if this accessory is used.
- Aux. Buzzer: Connection for the red/black jack plug for the bell, if this accessory is used.
- Dialer: Connection for the red/black jack plug for the phone dialler, if this accessory is used.
- Ext. Batt.:This connection is only needed if there is no electric current and a car battery is used.
- Power Transformer: Connection for a 12 Volt A/C adapter for use with a standard socket.
- A/C Adapter: Plug into the “Power transformer” (17) and a standard socket.